0.9 Hours -
The wing skins are finally drilled to the spars and ribs. Too many clecos!
After I finished drilling the wing skins, I test fit a leading edge skin in my cradle. The fit is perfect.
The leading edge skin fits nicely into the cradle.
Then, it was back to rib deburring. Since I got tired of deburring when I was working on the main wing ribs, I still have 12 leading edge ribs and about an equal number of tank ribs that need to be deburred, fluted and primed. Tonight, I used the ScotchBrite wheel to deburr the edges on 6 of the leading edge ribs. Finishing the ribs will probably take a few sessions, but breaking it up into short work periods seems to make it less monotonous.
Back to rib deburring...
