1.5 Hours -
Tonight, I wanted to finish up the vent line, so I temporarily installed vent line fittings and attached the vent line in order to cut the line to its final length.
I temporarily installed the vent line fittings in order to cut the vent line to its final size.
After this was done, it was back to the task of deburring the right tank parts. I managed to get all the holes in the baffle and ribs deburred, but I decided to switch to dimpling before tackling deburring the skin. I dimpled all of the stiffeners and a couple of the ribs before deciding to call it a night.
