2.5 Hours -
I’m back into deburr, dimple, and prime mode for awhile. Yes, I’m still delaying fixing the right fuel tank…
Today, I finished deburring and dimpling the left wing ribs and rear spar. Then, I started working on the left wing skins. First up was the top, inboard skin. I removed the blue plastic from the rivet lines on both sides of the skin, then deburred and dimpled all of the holes and deburred the edges of the skin. Once this was done, I scuffed-up the inside of the skin and sprayed some primer. The blue plastic makes nice masking before it is removed.
I primed only the rivet lines on the inside of the skin. Once the primer dries, I'll remove the rest of the blue plastic.
